Corso Systems needed to map a value coming from an Automation Direct PLC via Modbus TCP into a scaled integer value in an Ignition SCADA system. Automation Direct uses a non-standard format for their data compared to most Modbus TCP implementations. To accomplish this we used a bitmask, a tag change script, and a UDT in Ignition to get the job done.

Mitutoyo calipers are an integral tool to many QA/QC departments, and are commonly used in SPC applications to track measurements across the lifecycle of parts. In this post we show you how to integrate these calipers with an Ignition installation.

Here’s how Corso Systems uses Ignition Edge as a remote tag provider to get data into a full blown Ignition gateway. It is the first step to a truly fault resistant system architecture. We show you how to set it up.

Corso Systems shows you how to get the most performance out of Ignition's built-in process historian. On top of the basic functionality you can use the Tag History Splitter to store data to make recent data and long term data easily accessible for different use cases.

Corso Systems demonstrates how to set up a local client fallback setup for local control when a network outage occurs between the main gateway and your plant PLCs.

Following up on the first post comparing Ignition to Wonderware we take a deeper dive into the similarities and differences between these 2 platforms.

Read Corso Systems’ Vision vs. Perspective module comparison. Inductive Automation Ignition’s Perspective has widespread usage around the world, what about Vision? Learn when to choose Vision or Perspective.

Logs are a powerful tool in any software platform, especially SCADA solutions like Ignition. Most software doesn’t have a lot of logging built in, and we think it’s time to change that. Here are the best practices we use at Corso Systems for logging for any software we write.

Ignition has taken the manufacturing world by storm, when just a few short years ago Wonderware was the software platform to beat. We compare and contrast the differences in the 2 platforms as they stand today.

Corso Systems has upgraded Ignition SCADA systems across many different versions. In this guide we walk through the simple step by step process of upgrading your gateway, modules, licensing, and how to validate that everything works as expected after the Ignition upgrade.

The Corso Systems core values are listed on our homepage, this post goes into more detail about each one, including examples of how we live up to them every day.

The Pipe Tool for Ignition Perspective makes drawing complex P&ID schematics much faster. In this tutorial we demonstrate the tool plus what Inductive Automation doesn’t detail in their documentation!